User: Pass:


Here is our selection of split cane rodmaker's tools.

Power Beveller
power beveller head and hold downs front with dust cover node after milling

Designed to for use with a inserted finish head listed below

Basic Dimensions are 12"wide x 14"tall x 12"deep

Built from 1/8 steel plate
comes with three hold down attach points

Industrial Dark Machinery Grey finish

Supplied with Bosch 1617EVS router and all hardware

Supplied with your choice of one cutter head and four inserts

Is shipped ready to go, install the inserts and the cutter head in the spindle and start milling

At this time the bevellers are manufactured as ordered,
please allow 2 weeks for lead time prior to shipment

Here is a pdf that I have with more information concerning the beveller and a video

$1250.00 includes shipping to the lower 48 states all other deliveries will be charged actual freight costs

Included angle

$1000.00 Febuary Special, you get 20% off, it is like getting the cutter for free!

Included angle
Inserted Finishing Heads
61.5, 73.5 and 91.5 degree angles
61 degree finish head 61 degree finish head insert deltail 61 degree finish head end view

Custom machined for the split cane rodmaker

Designed to allow easy renewal of cutting edges
no cutter grinder required

Basic Dimensions are 1.75"dia x 3"OAL with a 1/2" shank 1.5" long and machined from barstock

Nominal cutting diameter of approx. 1.5"

The cutter uses four TPMW 32.50(3/8" IC with no radius)C3 inserts as the cutting edges
These inserts are sharp, built for milling in the woodworking industry

Each insert can be indexed 6 times if making 1/4" rough splines
Three times per pocket and then exchanged inboard to outboard

Is shipped with four inserts and lock down screws
replacement inserts and screws can be purchased from me

At this time the cutters are manufactured as ordered,
please allow 2 weeks for lead time prior to shipment

Here is a pdf that I have with more information concerning the heads

$325.00 plus shipping and handling

Included angle

Replacement Parts for Cutterheads

TPMW 32.50 Insert C3

3/8" IC insert

5/32" thick

No corner radius

C3 grade

4 pcs used per cutting head

$12.00 per insert plus shipping and handling

quanity and price

Insert Retaining screw

bought as 3/8 ACRA-screw

always anti-seize the threads prior to use

uses a 3/64 hex key

8-32 thread form

$3.00 per screw plus shipping and handling

Ferrule Station Cutters
Ferrule Station Cutters

Machined, hardened and ground from tool steel

Full Set contain #8 thru #18
Half set contains #11 thru #15

used to turn the end of split cane blanks round so you can bond the ferrules to the blank

The tools are design to self align and not dig or bind as they cut. They assure a consistant diameter the length of cut and from rod to rod.

They can be used either by hand or in a lathe.

Here is a pdf with basic setup suggestion

Full set #8-18
$225.00 plus shipping and handling

Half set #11-15
$130.00 plus shipping and handling

Reelseat Station Cutters
Reelseat station cutters

Machined, hardened and ground from tool steel

Used to turn the butt section of the rod blank to either 3/8" or 5/16" diameter

Due to the larger cut you should use a toolpost adapter to hold the tool in the lathe

Basic Idea for a tool holder

$22.50 each plus shipping and handling

sizes

Replacement Blades for Stanley Block Planes
.125 inch thick O1 Plane Blade

Machined, hardened and ground from O1 tool steel

Machined from 1/8" thick O1 tool steel

The blades are 1.625 wide with a .625 wide slot
they are replacements for the "new" stanley model

These blades are 33% thicker then 3/32" blades

Heat treated to provide a superior edge yet still easily sharpened

$31.75 each plus shipping and handling

Insert Turning Mandrel
insert mandrel
insert turning mandrel
mandrel tool parts

designed for turning a pre drilled rough blank in to a unmortised reelseat insert
This is the second part of my reelseat tooling family

The tool comes with up to three different size bushings(5/16, 11/32 and 3/8" diameter)to locate the id of the insert.
Will allow 4" to 3.5" spacer to be machined

Link to more information

spur is machined from tool steel and has a 5/8" chucking diameter

Here is a pdf with basic setup suggestion

Complete tool with three set of bushing
$69.00 each plus shipping and handling

Complete tool with two set of bushing
$57.00 each plus shipping and handling

Complete tool with one set of bushing
$45.00 each plus shipping and handling

Basic Tool with out bushings
sold as an add on to existing mortise tooling
$32.00 each including shipping to USA

please specify in the special instructions box which size of bushing you want with your tool

Turning tool options

Offset Mortise Turning Tool
mortise tool
mortise tool
mortise tool parts

designed for turning a mortise on a reelseat insert
you no longer need to use a router to form the mortise

comes with up to three different size bushings to locate the id of the insert. 5/16 11/32 and 3/8" diameter
Will allow 4" to 3.5" spacer to be machined

Link to more information

I've intended for the tool be used on a metal lathe, not sure how a hand held tool on a wood lathe would handle the interupted cut.

This tool will allow you to do away with a router set up and the need for a router bit

Here is a pdf with basic setup suggestion

Complete tool with three set of bushing
$110.00 each plus shipping and handling

Complete tool with two set of bushing
$98.00 each plus shipping and handling

Complete tool with one set of bushing
$85.00 each plus shipping and handling

please specify in the special instructions box which size of bushing you want with your tool

sets of bushings

updated March 21, 2013

© 2008-2009 - created by donsmoore.com